What To Do When The Lights Flash - Epson PowerLite 500c User Manual Supplement

Light Status
orange
flashing green
green
flashing orange
red
red
flashing orange
flashing red
flashing orange
red
flashing red
Projecting a Presentation
40

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status
and let you know when a problem occurs.
Description and action
The projector is in sleep mode. You can unplug it or press the
Power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is cooling down. You can't turn the projector on or
unplug it when the light is flashing.
Power is cut off because of an internal problem. Contact EPSON
for help.
The lamp is almost burned out. This is a good time to replace it.
See Chapter 4 for instructions.
The lamp is burned out. Replace the lamp, following the
instructions in Chapter 4.
There is a problem with the lamp, power supply, fuse, or circuit.
Contact EPSON for help.
The projector is too hot. Turn it off and let it cool before using it.
The projector has turned off automatically because it has
overheated. Let it cool for a few minutes, then turn it back on.
Make sure nothing is blocking the vents on the front and top of
the projector. If it continues to overheat, you may need to change
the air filter. See Chapter 4 for instructions.
There is a problem with the cooling fan or temperature sensor.
Contact EPSON for help.
power light
lamp light
temperature
light