note
The internal speaker is
disabled when you use an
external audio system.
Connecting to External Speakers or a
PA System
The projector's internal speaker is loud enough for most small-
or medium-size rooms. For large rooms or maximum volume,
you can connect the projector to external speakers or a public
address (PA) system.
You will need an RCA-to-3.5 mm stereo audio cable, which
may be included with your sound system, or may be purchased
from an electronics store.
Before you start, make sure the projector and speakers or PA
system are turned off.
1. Connect the cable's 3.5 mm stereo miniplug to the
projector's
Audio Out
Audio Out jack
2. Connect the RCA plugs to the speaker or PA system. Insert
the cable's red plug into the Audio R jack, and the white
plug into the Audio L jack.
jack.
stereo audio cable
Getting Started
21