Connecting S-Video Cables - Epson PowerLite 500c User Manual Supplement

Getting Started
20
4. Connect the red and white plugs at the other end of the
cable to the corresponding audio output jacks on your
video source.

Connecting S-Video Cables

If your video source supports S-video, and you have an S-video
cable, follow these instructions. Before you start, make sure the
projector and your VCR or other video source are turned off.
1. Insert one end of an S-video cable into the projector's
connector.
S-Video
S-Video connector
2. Insert the other end into the S-video-out jack of your video
source.
3. Connect the A/V cable to the left and right
the projector, matching the red and white plugs to the red
and white jacks.
4. Connect the plugs at the other end of the A/V cable to the
corresponding red and white audio output jacks on your
video source.
S-Video cable
Audio
jacks on