Positioning Your Image - Epson PowerLite 500c User Manual Supplement

caution
To avoid damaging the
lens, do not hold the
projector by the lens.

Positioning Your Image

Make sure your image is high enough for everyone in your
audience to see. If the image is too low, you can extend the
projector's feet to raise the lens.
1. Stand behind the projector and hold it while you press the
blue foot release levers. This unlocks the feet.
2. While pressing the foot release levers, raise or lower the
projector until the image is positioned where you want it.
3. Release the levers to lock the feet in the new position.
4. To fine-tune the height of the projector, turn the feet. Turn
clockwise to raise the projector and counterclockwise to
lower it.
Projecting a Presentation
29