Epson PowerLite 500c User Manual Supplement page 27

3. Press to select this feature. You see the following
Enter
message:
4. Select and press
Yes
the image.
5. Use the button on the remote control to select the
Enter
area of the image you want to use. Once you have selected
the entire area, press
6. When you see the message "Do you use this image?" select
and press
Yes Enter
selected, select
No
7. Use the button on the remote control to select a
Enter
zoom rate (display size), and then press
. A selection box displays over
Enter
.
Enter
. If you want to change the area
and repeat step 5. You see the following:
Enter
Using the Projector Menus
.
27