Adjusting Image Appearance; Adjusting Image Color - Epson PowerLite 500c User Manual Supplement

note
If you have repositioned the
image or adjusted the sync
setting, you can use the Auto
button on the remote
control to restore the default
settings.
3. Press to select the Position
Enter
option. You see the following on
the right side of the screen:
4. Tilt the button in the
Enter
direction you want to move the
image: left, right, up, or down.
5. When the image is positioned the way you want, press

Adjusting Image Appearance

Follow these steps to adjust the brightness, contrast, sharpness,
or gamma:
1. Press the button. You see the main menu listing,
Menu
with the Video menu highlighted.
2. Press to select the Video menu.
Enter
3. Press the bottom edge of the
repeatedly to select one of the following options:
Brightness
Contrast
Sharpness
Gamma (a measurement affecting overall brightness,
contrast, and color balance)
4. Press the right side of the
setting or the left side to decrease it. You see the effect of
your changes on the screen.
5. When the image is set the way you want it, press

Adjusting Image Color

Follow these steps to adjust the color:
1. Press the button. You see the main menu listing,
Menu
with the Video menu highlighted.
2. Press to select the Video menu.
Enter
button (or tilt it down)
Enter
button to increase the
Enter
Fine-Tuning Your Projector
.
Esc
.
Esc
49