Connecting To A Desktop Macintosh - Epson PowerLite 500c User Manual Supplement

connecting PS/2 mouse cable
note
Macintosh configurations
vary. See your computer
manual for the location of the
ports needed to connect your
projector.
Connecting to a Desktop Computer
10
1. Determine which type of mouse port your computer has:
Round PS/2 mouse port
Flat USB mouse port
2. Connect one end of the appropriate mouse cable to the
PS/2
Mouse/Com
projector.
3. Connect the other end to the mouse port on your
computer. (Your computer's mouse will be disabled while
you are using the remote control as a mouse.)

Connecting to a Desktop Macintosh

To connect the projector to your desktop Macintosh,
need to:
Connect the computer cable
Connect the audio cable (if you'll be projecting with audio)
Connect the mouse cable (if you want to use the remote
control as a mouse)
If you connect the projector to your Macintosh, you cannot
view your images on the computer monitor.
Follow the steps in each section for the cables you need to
connect.
port or the
USB Mouse
connecting USB mouse cable
port on the
®
you