Pronar T683
5.3.3
CLEANING THE AIR FILTERS
Depending on trailer working conditions, but not less than once in three months, take out and
clean air filter inserts, which are located in pneumatic system connection conduits. Inserts are
used many times and are not subject to changing unless they are mechanically damaged.
FIGURE 5.9
Air filter
(1) securing slide lock, (2) air filter cover
Cleaning the air filter (filters):
Required maintenance actions
Reduce pressure in supply conduit.
Remove securing slide (1) – figure (5.6).
• every 3 months of use,
Pressure in conduit can be reduced by pressing the head of the
pneumatic connection until resistance is felt.
5.20
SECTION 5