Replacement Of Parking Brake Cable And Adjustment Of Cable Tension - PRONAR T683 Operator's Manual

SECTION 5
IMPORTANT
The positions for fixing the brake cylinder in the bracket openings and the brake cylinder
pin in the expander arm are determined by the Manufacturer and must not be changed.
Each time when dismantling the pin or brake cylinder, the original fixing position should
be marked.
5.2.8 REPLACEMENT OF PARKING BRAKE CABLE AND ADJUSTMENT OF
CABLE TENSION.
FIGURE 5.7 Adjustment of main brakes
(1) brake crank mechanism, (2) parking brake cable, (3) guide roller, (4) expander arm, (5) U-
bolt clamp, (6) clamp nut, (7) shackle
Proper operation of the parking brake is dependent on the effectiveness of the rear axle
brake and the correct brake cable tension.
5.15
Pronar T683