Table of Contents
Advertisement
SECTION 5
After the first load of cable, re-check the condition of cable end, correct if
necessary.
Adjustment of parking brake cable tension:
Hitch trailer to tractor. Park trailer and tractor on level surface.
Place chocks under trailer rear wheel.
FIGURE 5.8
Installing brake cable clamps
Unscrew the brake mechanism bolt maximally (1) – figure (5.7),
(counterclockwise).
Loosen nuts (6) of U-bolt clamps (5) on handbrake cable.
Tighten cable and tighten clamps.
Checking and/or adjustment of parking brake:
5.3 PNEUMATIC SYSTEM MAINTENANCE
5.3.1
PRELIMINARY INFORMATION
Work connected with repair, replacement or regeneration of system components (brake
cylinders, conduits, control valve, braking force regulator, etc.) should be entrusted to
Length of parking brake cable should be so selected that at total
release of working and parking brake the cable would be loose and
hanging by 1 - 2 cm.
• every 12 months.
• If needed.
5.17
Pronar T683
Advertisement
Table of Contents
