Description Of Residual Risk - PRONAR T683 Operator's Manual

SECTION 2
• In the event of work requiring the trailer to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and
durable supports must also be used. Work must not be carried out under a trailer,
which has only been raised with a lift or jack.
• The trailer must not be supported using fragile elements (bricks or concrete
blocks).
• After completing work associated with lubrication, remove excess oil or grease.
The trailer should be kept clean and tidy.
• Exercise caution when climbing on top of the load box. Climbing on top of the
load box is possible by use of ladders placed on the front wall, extension and
draw bar and also folding steps inside the load box. Components not intended to
aid access may not be used for this purpose. Before entering load box prevent
trailer moving with parking brake and chocks.
• Do NOT make independent repairs of control valve, brake cylinders, tipping
cylinder ram and braking force regulator. In the event of damage to these
elements, repair should be entrusted to authorised service point or replace
elements with new parts.
• Do NOT make repairs to drawbar (straightening, repairing or welding). A
damaged drawbar must be replaced.
• Do NOT install additional appliances or fittings not according to the specifications
defined by the Manufacturer.
• The trailer may only be towed when axles and wheels, lighting system and brakes
are reliable.

2.2 DESCRIPTION OF RESIDUAL RISK

Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
• using the trailer for purposes other than those for which it is intended,
2.13
Pronar T683