Table of Contents
Advertisement
Pronar T683
The factory number of the axle shaft and its type are stamped onto the data plate (2) secured
to the axle shaft beam (1) – figure (1.2).
1.1.3 LIST OF FACTORY NUMBERS
VIN
S
Z
B
6
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is often essential to give the factory numbers of parts or the VIN number of the trailer,
therefore it is recommended that these numbers are inscribed in the spaces below.
1.2 PROPER USE
The trailer is designed for transport of harvested crops and agricultural products (loose, bulk
and long materials, etc.) as well as loads on EUR-pallets and pallet boxes at the farm and on
public roads. It is acceptable to transport construction materials, mineral fertilisers and other
loads, if fulfilling conditions indicated in section 4. Non-compliance with the recommendations
of the carriage and loading of goods described by the Manufacturer and the road transport
regulations in force in the country in which the trailer is used, shall void the warranty and is
regarded as use of the machine not according to its intended purpose.
The trailer is not intended or designed for transporting people, animals or goods classified as
dangerous materials.
The trailer is constructed according to current safety requirements and engineering
standards. The brake system and the light and indicator system meet the requirements of
road traffic regulations. The maximum speed of the trailer on public roads in Poland is 30
km/h (pursuant to Traffic Law Act of June 20th 1997, article 20). In the countries where the
8
3
0
0
0
X
1.4
SECTION 1
Advertisement
Table of Contents
