Table of Contents
Advertisement
Pronar T683
SECTION 3
Electro-hydraulic brake valve (1)- figure (3.10) adjusts braking force depending on setting.
Switching to a suitable working mode is done manually by machine operator using the lever
(2) prior to moving off. Three working positions are available: A - "no load", B - "half load"
and C - "full load".
3.2.4 HYDRAULIC TIPPING SYSTEM
FIGURE 3.11
Hydraulic tipping system construction and diagram
(1) telescopic cylinder, (2) three-way valve, (3) cut-off valve, (4) quick coupler, (5) socket,
(6) control cable, (7) guide roller, (8), (9) information decal
3.16
Advertisement
Table of Contents
