Taking Your Plow Out Of Storage - Boss Snowplow MSC08042C Owner's Manual

Taking the Straight Blade Plow out of Storage
1. Before you attach your plow check for cracked welds and check all fasteners for tightness.
Recommended Bolt Torque located in this manual.
2. Check all hydraulic hoses for cracks and leaks.
3. Change your snowplow hydraulic fluid using BOSS Snowplow High Performance Hydraulic Fluid.
Hydraulic Power Unit Fluid Fill Procedure located in this manual.
4. Check your cutting edge for excessive wear.
5. Check your plow shoes for wear.
6. Tighten your trip return springs.
7. Put a coat of grease on the coupler spring pins.
8. Attach the plow to the truck and extend the blade from one side to the other to check the hydraulic
cylinder rods for leaks, corrosion, or pitting.
9. Touch-up rust spots or chipped paint on the plow's metal parts.
10. Apply dielectric grease to the electrical plugs (lights, valve assembly, pump, pump solenoid, and
battery).
11. Align your plow lights once your snowplow is attached to the truck and it's in the raised position.
Headlight Aiming Procedure located in this manual..
58
See
See
See