Routine Maintenance - Boss Snowplow MSC08042C Owner's Manual

Straight Blade Maintenance
Your BOSS PLOW is designed for heavy-duty, rugged service with minimal maintenance. To ensure that it
gives you the same high performance year after year, please use it properly and observe the following
maintenance precautions.
Inspect the following on a regular basis:
1. All fasteners, pins, retainers, nuts and bolts for tightness.
2. All hydraulic lines and connections for wear and leakage.
3. Hydraulic cylinders for leakage, rods for rust or pitting.
4. Cutting edge wear.
5. Plow shoe wear.
6. Hydraulic oil level (CAUTION: DO NOT OVERFILL). Fill using BOSS Snowplow High Performance
Hydraulic Fluid or equivalent.
7. Control Harness and Power/Ground Cable Connectors for corrosion. Apply dielectric grease at least
once a month during the plow season.
8. Apply grease to coupler spring pins.
See Hydraulic Power Unit Fluid Fill Procedure located in this manual.
56
See Recommended Bolt Torque located in this manual.