Putting Your Plow Into Storage - Boss Snowplow MSC08042C Owner's Manual

Putting the Straight Blade Plow into Storage
1. Before you detach your plow grease any exposed chrome or nitro bar on the lift cylinder rod and on the
angle cylinders to protect them from corrosion.
2. Drive the snowplow to a storage site. Follow the normal procedure for removing the plow.
3. Power the lift tower forward until the lift cylinder is completely compressed. This will protect the lift
cylinder from corrosion.
4. Disconnect all electrical plugs and coat each connection with dielectric grease (lights, valve assembly,
pump, pump solenoid, and battery). Install all dust caps and plugs provided.
5. Touch-up any rust spots or chipped paint.
6. Loosen the trip return springs.
7. Grease the coupler spring pins.
8. Grease any exposed chrome on the angling cylinders to protect from corrosion.
57