Power-V Controllers
8. To move the RIGHT wing IN, pull the
controller stick diagonally to the right and
backward.
9. To move the LEFT wing IN, pull the controller
stick diagonally to the left and backward.
10. To angle the entire blade LEFT (Right Wing
out – Left Wing In) push the controller stick
directly to the left.
11. To angle the entire blade RIGHT (Right Wing
in – Left Wing out) push the controller stick
directly to the right.
12. The control should be turned off when not in
use. It can then be unplugged and stored.
Note: The raise/lower button can be rotated for
right hand or left hand operation by pulling up on
the controller stick and rotating to the desired
position.
14
Need help?
Do you have a question about the MSC08042C and is the answer not in the manual?
Questions and answers