Controllers - Boss Snowplow MSC08042C Owner's Manual

Power-V Controllers
Joystick Control Operating
Instructions
Figure 6. Power-V Control Operation
1. Toggle the ON/OFF switch to the ON
position. A red indicator light will illuminate on
the switch. The joystick is now active.
2. To RAISE the blade of the plow, toggle the
switch on the joystick handle upward.
3. To LOWER the blade of the plow, toggle the
switch on the joystick handle downward.
4. To FLOAT the blade along the contour of the
plowing surface, toggle the switch on the
joystick handle downward until the switch
reaches the detent position. (You will feel the
switch click into the detent position.) The
switch will stay in the FLOAT position until
the switch is physically re-centered.
5. To move the RIGHT wing OUT, push the
controller stick diagonally to the right and
forward.
6. To move the LEFT wing OUT, push the
controller stick diagonally to the left and
G10157
forward.
7. To SCOOP (Both LEFT and RIGHT wings
OUT), push the controller stick directly
forward.
13