These guidelines may not apply in all situations. Electromagnetic propagation is af-
fected by absorption and reflection form structures, object and people.
6.6
Cleaning and disinfection
Instructions
•
Be sure to unplug the power cord from the mains when cleaning your LCD monitor.
•
Take care not to scratch the front surface with any hard or abrasive material.
•
Dust, finger marks, grease etc. can be removed with a soft damp cloth (a small amount of mild deter-
gent can be used on the damp cloth).
•
Wipe off water drop immediately.
Possible cleaning solutions
•
70 percent isopropyl alcohol
•
1.6 percent aqueous ammonia
•
Cidex® (2.4 percent glutaraldehyde solution)
•
Sodium hypochlorite (bleach) 10 percent
•
"Green soap" (USP)
•
0.5 percent Chiorhexidine in 70 percent isopropyl alcohol.
•
Like Cleansafe® optical cleaning liquid
6.7
Explanation of symbols
Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
K5902135 (451920612562) MDSC-2326 01/12/2017
Indicates the device meets the requirements of the applicable EC directives.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B)
Indicates the device is approved according to the UL Recognition regulations
MEDICAL – GENERAL MEDICAL EQUIPMENT
AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA
CAN/CSA-C222.2 NO. 60601-1:14
Indicates the device is approved according to the UL Demko regulations
6. Important information
61