Toshiba TS3000 Series Instruction Manual page 16

series Robot Controller
This parameter specifies the IP address of the destination where each port is connected.
This is used in client mode only.
{IP0}
=(IP address of destination)
{IP1}
=(IP address of destination)
{IP2}
=(IP address of destination)
{IP3}
=(IP address of destination)
[E08] Robot community name
(Planned for use in function expansion)
[E08] Robot community name
= "NO1-TS3K"
This parameter specifies the community name of the network.
This is planned for usage when the Ethernet function is expanded.
[E09] DHCP
(Planned for use in function expansion)
[E09] DHCP
= 0
This parameter specifies if an address is obtained from the DHCP server.
This is planned for usage when the Ethernet function is expanded.
COMMUNICATION MANUAL
– 12 –
STE 80722