Smtp Settings - Digital Watchdog MEGApix Flex DWC-PVX16W2 User Manual

Setup - Network Setup

SMTP Settings

To send / save the image to the relevant sites by Email, SMTP needs to be setup.
General Setting - SMTP function can be enable or disable.
Mode - Select Security mode of SMTP from Plain or SSL / TLS. After checking account setup of your SMTP Server, you may select one.
SMTP Server Address - Define the SMTP Server Address. If the IP Address form is incorrect, a Message box will be shown to try again.
Port - Define the Port used in the Plain or SSL / TLS security mode in the above.
User ID - Define the User ID to access to SMTP Server. Fill out the correct User ID registered in the SMTP Server.
Password - Define the Password to access to SMTP Server. Fill out the correct Password registered in the SMTP Server.
E-Mail Sender - Define the e-mail address of E-Mail Sender. It will be displayed as the sender when the camera sends an E-mail.
E-Mail Receiver - Define the e-mail address of E-Mail Receiver. It will be displayed as the Receiver when the camera sends an E-mail.
Title - Define the title of the E-Mail when the camera sends an E-mail.
The title of the Email is limited to 40 characters including the spaces.
Message - Define the contents of E-Mail when camera sends an E-mail. The message of the Email is limited to 40 characters including the
spaces.
Click 'Apply' to make above setting effective.
45