Table of Contents
Advertisement
Setup - Network Setup
SMTP Settings
11
To send / save the image to the relevant sites by Email, SMTP
needs to be setup.
1
General Setting
SMTP function can be enable or disable.
2
Mode
Select Security mode of SMTP from Plain or SSL / TLS. After
checking account setup of your SMTP Server, you may
select one.
3
SMTP Server Address
Define the SMTP Server Address. If the IP Address form is
incorrect, a Message box will be shown to try again.
4
Port
Define the Port used in the Plain or SSL / TLS security mode
in the above.
5
User ID
Define the User ID to access to SMTP Server. Fill out the
correct User ID registered in the SMTP Server.
6
Password
Define the Password to access to SMTP Server. Fill out the
correct Password registered in the SMTP Server.
7
E-Mail Sender
Define the e-mail address of E-Mail Sender. It will be
displayed as the sender when the camera sends an E-mail.
8
E-Mail Receiver
Define the e-mail address of E-Mail Receiver. It will be
displayed as the Receiver when the camera sends an E-mail.
9
Title
Define the title of the E-Mail when the camera sends an
E-mail.
The title of the Email is limited to 40 characters including
the spaces.
10
Message
Define the contents of E-Mail when camera sends an E-mail.
The message of the Email is limited to 40 characters including
the spaces.
11
Click 'Apply' to make above setting effective.
3
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
