Timers - Xerox Document Centre 255 LP Reference Manual

Timers

How to get here
Tools Screen 1
System Settings
System Settings
Timers
System Timeout controls the time interval between the last action
at the User Interface and when the Touch Screen resets to the default
settings. The amount of time can be set from 1 to 10 minutes in 1
minute increments. The default time is 1 minute.
Auto Resume controls the time interval between when a job is
paused at the UI and when printing is resumed. The Auto Resume
timeout can be set from 15 seconds to 2 minutes in 15-second
increments (0.25 min.). The default time is 30 seconds.
External Attachments also share this timer. If a job using an external
attachment is prevented from operating by the external device and it
is not allowed to resume, it will be deleted when the timer expires.
NOTE Each of these timers can be disabled so they never activate.
Commonly Changed Setting
Page 6 - 22 Xerox Document Centre Reference Guide