Table of Contents
Advertisement
9.4.5.3 Viewing type A dependencies
9.4.6 Locating devices
9.4.6.1 Locating all devices in a zone
A6V10421795_en--_k
The 'View typeA dependency' function is used to view all devices which have
type A dependency activated.
1. Press
on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press
The 'Engineering' window is open.
3. Select 'Detector line' and press
The 'Detector line' window is open.
4. Select 'View' and press
The 'View' window is open.
5. Select 'View typeA dependency' and press
A list of all devices with activated type A dependencies is displayed.
6. Select one device and press
The details of the type A device are displayed as follows.
View typeA dependency
Auto alarm 5
Type A inhibit time(sec) 30
The 'Type A function' can be configured by 'FC360 Panel Configurator'.
Use this function to locate all the devices in a zone.
1. Press
on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press
The 'Engineering' window is open.
3. Select 'Detector line' and press
The 'Detector line' window is open.
4. Select 'Locate' and press
The 'Locate' window is open.
5. Select 'Zones' and press
A list of all zones is displayed.
6. Select one zone and press
Two commands are listed: 'Locate' and 'Quit locate'.
.
.
.
.
.
L3
.
.
.
.
.
Engineering
9
Detector line
97 | 151
Advertisement
Table of Contents
