Handling Electrostatic Sensitive Devices (Esd) - Siemens Sinamics G130 Basic Operator Panel 20 Operating Instructions Manual

Safety information

1.2 Handling electrostatic sensitive devices (ESD)

1.2 Handling electrostatic sensitive devices (ESD)
Electrostatic sensitive devices (ESD) are individual components, integrated circuits, modules
or devices that may be damaged by either electric fields or electrostatic discharge.
NOTICE
Damage through electric fields or electrostatic discharge
Electric fields or electrostatic discharge can cause malfunctions through damaged
individual components, integrated circuits, modules or devices.
• Only pack, store, transport and send electronic components, modules or devices in their
• Only touch components, modules and devices when you are grounded by one of the
• Only place electronic components, modules or devices on conductive surfaces (table
The necessary ESD protective measures are clearly illustrated in the following diagram:
● a = conductive floor surface
● b = ESD table
● c = ESD shoes
● d = ESD overall
● e = ESD wristband
● f = cabinet ground connection
● g = contact with conductive flooring
Figure 1-1
10
original packaging or in other suitable materials, e.g. conductive foam rubber or
aluminum foil.
following methods:
– Wearing an ESD wrist strap
– Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring
with ESD surface, conductive ESD foam, ESD packaging, ESD transport container).
ESD protective measures
Basic Operator Panel 20 (BOP20)
Operating Instructions, 11/2017, A5E00809375A