Where To Get Help; Macintosh System Requirements - Epson Stylus Pro 7900 User Manual

Tip: If you experience
difficulty with the
toll-free line or your
Unit ID number, call
(562) 276-1305.
Caution: Using an
improperly shielded
cable—especially a cable
more than 10 feet (6 m)
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to run the
printer at full speed.

Where To Get Help

Epson provides technical support and information on the installation,
configuration, and operation of professional printing products through the
Epson Preferred Limited Warranty Plan. Dial (888) 377-6611, 6
SM
6 , Pacific Time, Monday through Friday. Days and hours of support are
PM
subject to change without notice.
Before you call, make sure you have your Unit ID number, which is
included with the Epson Preferred Limited Warranty Plan information that
came with your printer. You'll also need your printer serial number and
proof of purchase.
Visit Epson's U.S. support website or Canadian support website and select
your product for solutions to common problems. You can download drivers,
firmware, and documentation, get FAQs and troubleshooting advice, or
e-mail Epson with your questions.

Macintosh System Requirements

To use your printer in either a stand-alone or peer-to-peer network
environment, your Macintosh
Mac OS ® X 10.4.9 or higher
•
PowerPC ® G5, Intel
•
At least 2GB of RAM (4GB or more recommended)
•
At least 32GB of free hard disk space for software and processing files
•
Quad-speed (4×) or faster CD-ROM or DVD drive for installing the
•
printer software
For USB connection: a compliant USB Hi-Speed 2.0 port and a
•
shielded USB "AB" cable from Series A (computer) to Series B (printer),
up to 10 feet (6 m) long
For network connection: Ethernet-equipped Macintosh and a
•
Category 5 compatible cable
® system should meet these requirements:
® , or higher processor
13
Introduction | 13
to
AM