DT SWISS F 535 ONE Technical Manual page 31

5. Carefully press the back of the valve cap onto the
valve insert and GRADUALLY release the air.
6. Slowly compress the fork two times about 10 mm
with the valve insert pressed and pull it apart
again.
→ This balances the positive and negative air
chambers.
7.4 OPENING THE AIR CHAMBER
1. Make sure the valve cap is removed and the air is
completely released.
2. Ensure that the area around the air chamber
cap is clean to prevent dirt from entering the air
chamber.
3. Unscrew the air chamber cap with a 15 mm
hexagon socket and a ratchet.
4. Pull the air chamber cap out of the air chamber.
F 535 ONE Technical Manual V2021.11
31