DT SWISS F 535 ONE Technical Manual page 30

7.2 REQUIRED TOOLS AND MATERIALS
Required tools and materials
APT ADJUSTMENT KIT F535
15 mm hexagon socket
28 mm open end wrench
Torque wrench 25 Nm
7.3 RELEASING THE AIR
1. Unscrew the fixing screw of the cover on the
spring side.
2. Remove the cover.
3. If necessary, clean the area under the cover to
prevent dirt from entering the air chamber.
4. Unscrew the valve cap.
30
Specification Quantity Article number
1 FWXXXXXXXXXX18795S
1
1
1