DT SWISS F 535 ONE Technical Manual page 32

7.5 CHANGING THE O-RING OF THE AIR CHAMBER CAP
1. Remove the O-ring from the air chamber cap.
2. Clean the seat of the O-ring and the thread of the
air chamber cap and grease it slightly.
3. Slightly grease the new O-ring and fit it onto the
air chamber cap.
7.6 ADDING / REMOVING APT VOLUME SPACERS
NOTE
RISK OF DAMAGE THROUGH THE INSTALLATION OF MORE THAN THREE VOLUME SPACERS!
If more than three volume spaces are mounted, the fork cannot compress completely.
• Never mount more than three volume spacers!
1. Add or remove the volume spacer using a 28 mm
wrench.
→ The maximum number of three volume
spacers must not be exceeded!
2. Tighten the volume spacer with a torque of 2 Nm.
32
2 Nm