DT SWISS F 535 ONE Technical Manual page 21

7. Turn the remote wheel clockwise for about 270°
until the limiter cap snaps into the hole of the
remote wheel with an audible „klick" using a 19
mm wrench.
8. Continue turning the remote wheel about 70°
until stop.
→ The lockout shaft is in position «LOCK».
9. Hold in this position and tighten the nut
with a torque of 5 Nm using the tool
FXTXXXXXXXX018645S.
10. Put the O-ring into the remote wheel.
11. Put on the compression cover.
« klick »
FXTXXXXXXXX018645S
19 mm
F 535 ONE Technical Manual V2021.11
19 mm
21