Download Print this page

DT SWISS F 535 ONE Technical Manual page 14

Hide thumbs Also See for F 535 ONE:

4.6 ASSEMBLING THE LOWER UNIT

1. Before mounting the lower unit, the damping unit should be fully compressed once. This ensures that the

correct amount of damping oil is in the damping unit. A small amount of oil may drip from the stanchion.

2. Pull out the damping unit completely.

Vertical play in the damping unit is normal.

3. Check, if the O-rings of the connectors are still in place.

4. Slide the SAG O-ring onto the stanchion tube if necessary.

5. Slide the lower unit about 5 cm onto the stanchions.

Table of Contents