Advertisement
1. GENERAL
1.1 VALIDITY
This manual describes the component specified on the front page and the footer. It is valid for the technical
condition of the component at the Okt. 15, 2021. Design changes are reserved.
1.2 SAFETY
The safety instructions are classified as follows:
DANGER
...indicates a hazardous situation that, if not avoided, will result in death or serious injury.
CAUTION
... indicates a hazard with a medium level of risk which, if not avoided, may result in minor or moderate
injury.
NOTE
... indicates a potentially hazardous situation that may result in damage to property.
1.3 TARGET GROUP
This manual is intended for the user of the component and dealers. This manual offers the experienced user
the possibility to carry out minor service work himself. If you have any doubts about your own abilities, you
should definitely contact a specialist or a DT Swiss Service Center.
Any warranty claims will lapse if work is not carried out properly.
1.4 HOW TO USE THE MANUAL
The steps described in this manual must be carried out in the order they are shown. If steps are ignored or
executed in a wrong order, the function of the component cannot be guaranteed.
Instructions begin with the table «Preparatory Steps» and end with the table «Closing Steps». The instructions
in these tables must be carried out.
R 535 ONE Technical Manual V2021.10
3
Advertisement
