Advertisement
REMOVING THE SLEEVES
1. Remove the sleeves by hand.
TESTING THE DU BUSHINGS
1. Clamp the DU pin into a vice.
2. Rotate the shock on the pin to check the DU
bushing.
→ If the shock can be rotated without
resistance, the DU Bushings must be
changed. See following.
→ If the shock can be rotated with resistance,
the DU bushing must not be changed.
Check the DU bushing again within the next
small service.
Mount the sleeves and the O-rings again (see
"Mounting the sleeve" on page 21).
18
Advertisement
