Advertisement
3.5 SMALL SERVICE
This chapter describes a small service. Further service works will be carried out by a DT Swiss service center.
A small service should be carried out in the following cases:
•
The interval for a small service is expired (see table at the beginning of this chapter).
•
Leakage that becomes apparent through repeated air loss. The shock must be inflated regularly.
•
Unusual sounds (squeaking).
•
Other defects or malfunctions.
PREPARATORY STEPS
Dismount the shock from the bike.
Dismount the shock hardware.
Clean the surface of the shock.
REQUIRED MATERIAL
service kit air chamber
grease
NOTE
RISK OF DAMAGING THE SHOCK!
To avoid damages, always clamp the shock or parts of the shock into ground clamping jaws, aluminum
clamping jaws or plastic clamping jaws.
Link
see "1.5 General Maintenance Information" on page 4
Specification
Gen1 (grooves on air chamber):
•
standard mount: CWXXXXXX10095S
•
trunnion mount: CWKXXXXX23788S
Gen2 (no grooves on air chamber):
•
standard mount: CWKXXXXX37898S
•
trunnion mount: CWKXXXXX37893S
Buzzy's Slick Honey
4.7 dl: 40341000AD02000001
or
20 ml: TZXXXXXNSLICKS
R 535 ONE Technical Manual V2021.10
Quantity
1
as required
9
Advertisement
