DT SWISS R 535 ONE Technical Manual page 20

MOUNTING THE DU BUSHINGS
1. Slightly grease the inner surface of the shock
eyelet and the outer surface of the bushing.
2. Put the bushing onto the pusher.
3. Position the bushing to the shock eyelet that the
gap is oriented 90° to the axis of movement of the
shock.
4. Align the receiver like shown in the picture.
5. Push in the bushing using a press or a bench vise.
20
pusher
TOOL KIT DU BUSHING MOUNTING ASSEMBLY CXTXX10031928S
GREASE
receiver