DT SWISS R 535 ONE Technical Manual page 19

REMOVING THE DU-PIN
1. Slide the pusher into the DU pin.
2. Align the receiver like shown in the picture.
3. Push out the DU pin using a press or a bench vise.
REMOVING THE DU-BUSHING
1. Slide the pusher into the DU bushing.
2. Align the receiver like shown in the picture.
3. Push out the DU bushing using a press or a bench
vise.
pusher
TOOL KIT DU PIN UNMOUNTING ASSEMBLY CWTXX10031935S
pusher
TOOL KIT DU BUSHING UNMOUNTING ASSEMBLY CWTXX10031927S
R 535 ONE Technical Manual V2021.10
receiver
receiver
19