General - DT SWISS R 232 ONE Technical Manual

1. GENERAL

1.1 VALIDITY
This manual describes the component specified on the front page and the footer. This manual is valid for the
design of the product as of 15.10.21. Deviations are possible and all items are subject to technical changes.
1.2 SAFETY
The safety instructions are classified as follows:
DANGER
...indicates a hazardous situation that, if not avoided, will result in death or serious injury.
CAUTION
... indicates a hazard with a medium level of risk which, if not avoided, may result in minor or moderate
injury.
NOTE
... indicates a potentially hazardous situation that may result in damage to property.
1.3 TARGET GROUP
This manual is intended for the user of the component and dealers. This manual offers the experienced user
the possibility to carry out minor service work himself. If you have any doubts about your own abilities, you
should definitely contact a specialist or a DT Swiss Service Center.
Any warranty claims will lapse if work is not carried out properly.
1.4 LAYOUT
The cover page and the footing provide information about the type of product and manual as well as the
version of the manual. The DT Swiss contact details can be found on the back. A list of all DT Swiss service
centers can be found at www.dtswiss.com.
This manual is intended for being printed as an A5 booklet. Only print this manual if electronic usage is not
possible.
R 232 ONE Technical Manual V2021.10
3