DIGITAL DISPLAY
Heat from
Heat from
above
below
Time
– in standby-mode:
clock / during operation:
countdown for cooking time
Temperature
for manual
settings and / or amount /
weight for pre-defined pro-
grams
CONTROL PANEL
Function
Tempe-
Time
Press the appropriate button for selecting the desired parameter, thereafter
rature/
select the parameter value via the selection dial.
Weight
Function control the heating elements, convection fan and child lock / select
a predefinded oven program.
Temperature / Weight depending on the set function press this button to
select temperature or amount.
Time in standby mode: set the clock / with a function selected: setting the
cooking time.
START to start heating or reassume operation after an interruption.
PAUSE/STOP press once to interrupt a running program, press twice to can-
cel operation.
Start
Pause/
Custom
CUSTOM to save or recall and start your self-programmed settings.
Stop
Selection Dial for setting the value of the currently selected parameter.
4
Heat from
Convection
Child lock
above and
heat
below
8 pre-definded pro-
with a customized program
in memory, this icon will be
IMPORTANT INSTRUCTIONS FOR SAFE OPERATION
Carefully read all instructions before operating this appliance and save the
instructions for further reference. This appliance is intended for cooking food,
thus electrically heated to very high temperatures during operation. Do not
attempt to use this appliance for any other than the intended use described
in these instructions. Any other use, especially misuse, can cause severe inju-
ries or damage by electric shock, heat or fire. Never leave the appliance
unattended when connected to the power supply.
Any operation, repair and technical maintenance of the appliance or any
parts of it other than described in these instructions may only be performed
at an authorised service centre. Please contact your vendor.
grams
IMPORTANT SAFEGUARDS FOR DAILY OPERATION
•
for use in moving vehicles. Do not operate or store the appliance
in humid or wet areas or outdoors. Do not attempt to operate the appliance
using any parts or accessories not recommended by the manufacturer to avo-
id risk of fire, electric shock and damage.
The appliance is intended for household use only and NOT suited for
Custom
commercial usage. Do not attempt to use this appliance in any other
way or for any other purpose than the intended use, described in these
instructions. Any other use is regarded as unintended use or misuse, and
illuminated
can cause severe injuries or damage. There is no warranty claim of the
purchaser if any injuries or damages are caused by unintended use.
• Check the entire appliance regularly for proper operation – especially the
power cord. The pins of the power cord must be clean, smooth and without
discolouration. Do not operate the appliance, when the appliance or any
part of it is likely to be damaged to avoid risk of fire, electric shock or inju-
ries to persons or any damage. The appliance is likely to be damaged if the
appliance was subject to inadmissible strain (i.e. overheating, mechanical or
electric shock, moisture) or, if there are any cracks, excessively frayed parts,
or distortions. In this case, immediately unplug the appliance and return the
entire appliance (including all parts and accessories) to an authorised ser-
vice centre for examination and repair. Do not attempt to disassemble the
appliance.
This appliance is for household use only and NOT intended
5
Need help?
Do you have a question about the DESIGN BISTRO OVEN ADVANCED PRO and is the answer not in the manual?