Configuring The Network Interface (For Macintosh Users) - Epson EPL-6200 Network Manual

Network Guide
13. Click the Finish button, and then follow the on-screen instructions to complete the
installation.
Now you can use the printer on the TCP/IP network.

Configuring the Network Interface (For Macintosh Users)

Configure the network interface for use on the TCP/IP network and install the printer driver
on your computer.
Note:
This section explains the instructions using Mac OS X. The instructions are almost the same for
Mac OS 9.
1. Insert the Software CD-ROM in the CD-ROM drive.
The EPSON folder opens automatically. If it does not open, double-click the EPSON
CD-ROM icon.
2. Double-click the appropriate OS icon in the EPSON folder.
3. Make sure that all applications are closed, and then click the Easy Install button.
4. Select Network.
Note:
If your printer is connected to your computer with a USB cable or a parallel cable, select Local,
and then follow the on-screen instructions.
5. Click the Install button, and then follow the on-screen instructions.
36
How To