Epson EPL-6200 Network Manual page 107

Network Guide
5. To assign an IP address manually, enter the IP address, the subnet mask, and the
default gateway. Be sure the IP address does not conflict with any other devices on the
network.
Note:
If there is a server or a router functioning as a gateway, enter the IP address of the server or the
router for the gateway address. If there is no gateway, leave the default values there.
6. If you want to get a private address between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot be obtained by the DHCP server, leave it at
Enable for Set Using Automatic Private IP Addressing (APIPA); otherwise, select
Disable.
7. When setting an IP address using the ping command, select Enable for Set Using
PING. Select Disable when setting an IP address with EpsonNet Config; this prevents
any unexpected change of the IP address.
Note:
Be sure to select Disable when not using ping; this prevents an unexpected change of the IP
address by EpsonNet WebManager.
8. Select Enable for Acquire DNS Server Address Automatically if you want to acquire
the DNS server address using the DHCP server.
If you want to enter the DNS server address manually, select Disable and then enter
the IP address of the DNS server.
9. Select Enable for Acquire Host Name and Domain Name Automatically if you want
to acquire the host name and the domain name using the DHCP server.
If you want to specify manually, enter the host name and the domain name in the text
boxes.
10. Select Enable for Register Network Interface Address to DNS Server if you want to
register the host name and domain name to the DNS server through the DHCP server
that supports Dynamic DNS.
If you want to register the host name and the domain name directly to the DNS server,
select Enable for Register Network Interface Address Directly to DNS Server.
11. Select Enable or Disable for Use Universal Plug and Play. Select Enable if you want
to use the Universal Plug and Play function on Windows Me or future operating
systems.
12. Change the default Universal Plug and Play device name, if desired. This device name
is used for Windows that supports the Universal Plug and Play function.
107
Network Software