Network Guide
Note:
❏ To activate the Network Menu settings, you must turn off the printer for more than five seconds
and then turn it back on. Or, you can perform a Reset All operation, as explained in "Reset
Menu" in the User's Guide.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you
reset the printer.
AUX Menu
This menu allows you to control the optional interface settings from the printer's control
panel.
Note:
The AUX Menu appears only when an optional interface is installed.
Item
AUX I/F
Get IPAddress*
IP*
SM*
GW*
NetWare*
AppleTalk*
MS Network*
Bonjour*
AUX Init*
Buffer Size*
* Available only when On is selected as the AUX I/F setting.
AUX I/F
Allows you to activate or deactivate the AUX interface when an optional interface card is
installed.
Buffer Size
Determines the amount of memory to be used for receiving data and printing data. If
Maximum is selected, more memory is allocated for receiving data. If Minimum is selected,
more memory is allocated for printing data.
Settings (default in bold)
On, Off
Panel, Auto, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
On, Off
-
Normal, Maximum, Minimum
Tips for Administrator
170