Windows 2000 - Epson EPL-6200 Network Manual

Network Guide
Selecting the port
1. Click Start, and then select Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set using the NET USE command.

Windows 2000

For Windows 2000, the printer driver installation procedure differs depending on the
printing method you prefer. Epson recommends printing with EpsonNet Print. See "For
Windows XP/Server 2003/2000/NT 4.0 Users" on page 131.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See "About EpsonNet Print" on
page 130 for details.
1. Click Start, point to Settings, and then select Printers.
2. Double-click Add Printer to start the Add Printer wizard, and then click Next.
3. Click Local printer, clear the Automatically detect and install my Plug and Play
printer check box, and then click Next.
Note:
You must clear the Automatically detect and install my Plug and Play printer check box
because the printer is attached directly to the network, not to a Windows 2000 computer.
53
How To