Epson EPL-6200 Network Manual page 68

Network Guide
For NetWare 5.x
The IPX protocol must be installed (bound) on the NetWare 5.x server.
About modes
If the mode you have logged in is different from the mode you set for the network interface,
a message appears when you try to configure the network interface for NetWare. If you do
not want to change the current settings, click Cancel and log in again using the same mode
set for the network interface.
Using Bindery Print Server (NetWare 3.x/4.x)
This section contains instructions on using the network interface in the Print Server mode
on NetWare 3.x/4.x/IntranetWare with Bindery emulation.
Note:
The network interface in the Print Server mode of NetWare 3.x does not allow you to use the Print
Server status display control with PCONSOLE.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server with supervisor privileges.
You must log in with the bindery connection.
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config
User's Guide for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web
Browser. See "NetWare" on page 122 for details.
Using NDS Print Server (NetWare 4.x/5.x/6.0)
This section contains instructions for using the network interface in the Print Server mode
on NetWare 4.x, IntranetWare, NetWare 5.x, or NetWare 6.0 with NDS mode.
1. Turn on your printer.
2. From any NetWare client, log in to the target context of the NDS tree as an ADMIN.
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config
User's Guide for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web
Browser. See "NetWare" on page 122 for details.
68
How To