Windows Server 2003 - Epson EPL-6200 Network Manual

Network Guide

Windows Server 2003

For Windows Server 2003, use the following procedure to install the necessary
components.
Note:
❏ The Windows Server 2003 CD-ROM may be required during the installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and
the default gateway of the computer.
1. Click Start, point to Control Panel, and then select Network Connections. Click
Local Area Connections.
2. Click the Properties button.
3. Check if the following necessary components are in the list. If they are already installed,
go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, AppleTalk, IPP, SNMP (IP trap)
MS Network
NetWare, SNMP (IPX trap)*
* Only for printers supporting NetWare queue-based printing
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
Latest Novell Client downloaded from the Novell
Web site
24
How To