Function Of Universal Plug And Play; Uninstalling Software; Windows Me/98/95/2000/Nt 4.0 - Epson EPL-6200 Network Manual

Network Guide
Note:
❏ Use NetBEUI printing if you do not want to go through these steps.
❏ See the manual of the Dial-Up router for more information on scorp range, bind, exclusive
address of the DHCP function.

Function of Universal Plug and Play

When you connect your printer to the network, the printer is automatically assigned with an
IP address, and the printer's icon appears in the My Network Places folder. By
double-clicking the printer's icon, you can access EpsonNet Config with Web Browser for
basic information about the printer, such as manufacturer, model name, location, and
administrator's name.
Right-click the printer's icon in the My Network Places folder and select Properties. You
can check the brief information of the network interface.
To use this function, the Universal Plug and Play must be installed on Windows Me or
future operating systems. For information on how to install Universal Plug and Play, see
the Windows Me online help.
Note:
Before using the Universal Plug and Play function, you must enable the Universal Plug and Play
function in EpsonNet Config. See the EpsonNet Config User's Guide or "Configuring the Network
Interface Using Web-Based EpsonNet Config" on page 105.

Uninstalling Software

Follow the steps below to uninstall the network software.

Windows Me/98/95/2000/NT 4.0

1. Click Start, point to Settings, and then select Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Select the utility you want to uninstall, and then click the Add/Remove button (Windows
Me/98/95/NT 4.0) or the Change/Remove button (Windows 2000).
4. Follow the on-screen instructions to complete uninstallation.
Tips for Administrator
176