Epson EPL-6200 Network Manual page 127

Network Guide
IPX Trap
Items
Trap
Address
Community
Socket Number
Printing Control
Items
Printing Control
Printer Access Control
Printer Access Control List
Timeout
Printing
Items
Change Timeout Value
LPR
RAW (Port9100)
IPP
Explanations
Enable or Disable the trap.
Enter Network Address and Node Number (MAC Address)
of the server to which the trap is transmitted.
Format:
Network Address: Node Number
Suppose Network Address is A7E00BB0 (hexadecimal) and
Node Number is 000048930000 (hexadecimal). In this
case, the address is A7E00BB0:000048930000.
Enter the community name (up to 32 characters).
Enter the Socket Number of the receive host, in
hexadecimal(0-FFFF).
Explanations
Enable or Disables the printing control.
Select Allow or Deny. Selecting Allow permits the network
access from the IP addresses registered on the printer
access control list. On the other hand, selecting Deny
blocks the network access from the IP addresses
registered on the printer access control list.
Enter the IP address ranges by which the network access
is restricted.
Explanations
Select this check box when you set the values before a
timeout occurs.
Set the length of time for LPR before a timeout occurs
(between 0 and 3600 seconds). Enter 0 not to apply the
timeout.
Set the length of time for RAW (Port9100) before a timeout
occurs (between 0 and 3600 seconds). Enter 0 not to
apply the timeout.
Set the length of time for IPP before a timeout occurs
(between 0 and 3600 seconds). Enter 0 not to apply the
timeout.
127
Network Software