Epsonnet Config For Macintosh; About Epsonnet Config; System Requirements; Installing Epsonnet Config - Epson EPL-6200 Network Manual

Network Guide

EpsonNet Config for Macintosh

About EpsonNet Config

EpsonNet Config for Macintosh is a Macintosh-based configuration software for
administrators that allows you to configure the network interface for TCP/IP, AppleTalk,
and IPP.
Note:
Be sure to use EpsonNet Config included on the Software CD-ROM shipped with this product.

System Requirements

The following table lists the system requirements of EpsonNet Config.
Operating systems
Models
Hard disk drive space

Installing EpsonNet Config

Follow the steps below to install EpsonNet Config to configure the network interface.
1. Insert the Network Utilities CD-ROM in the CD-ROM drive.
The EPSON folder opens automatically. If it does not open, double-click the EPSON
CD-ROM icon.
2. Select the appropriate OS icon in the EPSON folder, and then double-click it.
3. Make sure that all applications are closed, and then click the icon located next to
EpsonNet Config.
4. Follow the on-screen instructions to complete the installation.
Mac OS X 10.x, 9
PowerPC Macintosh/Intel Macintosh
10 MB
102
Network Software