Epson EPL-6200 Network Manual page 91

Network Guide
Creating a Printer Agent automatically
You can create a Printer Agent automatically. Only public access printers can be created
in this way. See "Creating Public Access Printers Automatically" in the EpsonNet NDPS
Gateway manual for detailed information.
Creating a Printer Agent manually
You can create Printer Agents, either public access printers or controlled access printers.
The way to create a Printer Agent differs depending on the printer type you choose.
1. Select a printer type (either public access printer or controlled access printer).
2. Create a public access printer. If you want to create a controlled access printer, go to
step 3.
In NetWare Administrator, double-click the NDPS Manager you have created. Click
Printer Agent List, and then click New. Type the Printer Agent name, and then select
EpsonNet NDPS Gateway Configuration for the Gateway Type. Click OK. Then go to
step 4.
3. Create a controlled access printer.
In NetWare Administrator, select the Directory context icon. Select Create from the
Object menu, and then select NDPS Printer. Type the Printer Agent name, and then
select Create a new Printer Agent, and then click Create. Select the NDPS Manager
you have created, and then select EpsonNet NDPS Gateway Configuration for the
Gateway Type. Click OK.
4. Select Remote (LPR on IP).
5. Configure it as described below. It is a good idea to print a network status sheet of the
network interface and configure the corresponding items.
❏ For Remote (LPR on IP) connection:
IP Address: Enter the IP address of the network interface. You can confirm the IP
address on the network status sheet.
6. When you finish filling in the boxes, press Finish. Follow the on-screen instructions.
7. The Select Printer Drivers dialog box appears. Select an appropriate printer driver for
Windows Me/98 and Windows 2000/NT 4.0. Be sure to select the correct printer driver
for your printer from the appropriate menus. Windows 3.1 is not supported.
8. Click Continue.
91
How To