Lj4 Emulation - Epson EPL-6200 Network Manual

Network Guide

LJ4 Emulation

Items
Emulation
Font Source
Font Number
Pitch
Height
Symbol Set
Form
Source Symbol Set
Dest Symbol Set
CR Function
LF Function
Tray Assign
Set button
Refresh button
GL2 Emulation
Items
Emulation
GL-Mode
Scale
Origin
Pen
Explanations
Select LJ4.
Select the default font source.
Type the default font number from the default font source.
Type the default font pitch if the font is scalable and
fixed-pitch.
Type the default font height if the font is scalable and
proportional.
Select the default symbol set.
Type the number of lines for the selected paper size and
orientation.
Available only when an optional font ROM is installed.
Available only when an optional font ROM is installed.
Select CR (carriage-return) or CR+LF
(carriage-return/line-feed) operation whenever the print
position exceeds the right margin.
Select LF (line-feed) or CR+LF (carriage-return/line-feed)
operation to add a line feed to each carriage return it
receives.
Select the tray assigning from 4, 4K, or 5S. When 4, 4K, and
5S are selected, LaserJet 4 Compatible, LaserJet
4000/5000/8000 Compatible, and LaserJet 5 Si
Compatible are available respectively.
Saves any changes.
Clears any changes and reloads the previous settings.
Explanations
Select GL2.
Select whether the emulation is similar to the GL/2 or the
HP LaserJet 4 emulation of the GL/2.
Select whether the output from the software is scaled,
and if so, how the scale factor is calculated: based on the
output paper size of the software application.
Select whether the logical origin of the "plotter" is from
the corner or the center of the paper.
Select the logical "pen" which "plots" the drawing.
117
Network Software