Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SSD-F User Manual

X11SSD-F User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Philips
Screwdriver
(1)

Tools Needed

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips Screws
(7)
A
C
C
A
UID
KVM
SW1
JIPMB1
JSTBY1
IPMI_LAN
JSMB1
USB2(3.0)
JPB1
C
A
LED3
JBT1
J4
Intel
C236
JSD1
JVR1
SATA DOM POWER
I-SATA2 I-SATA3
JTPM1
BT1 SATA DOM+POWER
X11SSD-F
REV:1.00
DESIGNED IN USA
CPU Socket
LGA1151
J5
FAN1
S-SGPIO1
22
Standoffs (7)
Only if Needed